Skip to main content

JORS Messages

TIP FILE NUMBER EXPECTED​

Description

  • The SMAJOR/ECL does not contain the TIPFILE statement after the @XQT SMAJOR statement.
  • Indicates a corrupted SMAJOR/ECL element.

* INVALID REALTIME PRIORITY: <xx>​

and

* ASSUMING REALTIME PRIORITY 35​

Description

  • The program's XQT statement activated the RealTime option, but the runstream did not provide a valid priority.
  • The <xx> field displays the invalid priority. Valid priority values range from 02 to 35.
  • The program's priority defaults to 35.

* REALTIME OPTION SELECTED, BUT NON-NUMERIC LEVEL: <xx>​

and

* ASSUMING REALTIME PRIORITY 35​

Description

  • The program's XQT statement activated the RealTime option, but the runstream did not provide a valid priority.
  • The <xx> field displays the invalid priority. Valid priority values range from 02 to 35.
  • The program's priority defaults to 35.

** REG KEYIN ERROR, STATUS= <keyin-registration-status-code> ​

Description

  • The program received an error while attempting to register a console keyin reserved word.
  • The <keyin-registration-status-code> field contains the error code returned by the registration procedure.
  • Refer to Unisys documentation for the error code's meaning.

SMA JOB OUTPUT RETRIEVAL ACTIVE - hh:mm:ss.tt​

Description

The Job Output Retrieval System (JORS) is ready to accept requests.

Keyin <keyin-word> Registered for <console-mode> users​

Description

  • The program successfully registered the <key-word> as a console command.
  • The command is available to users with the <console-mode> capabilities, or higher.

* UNAUTHORIZED @@CONS KEYIN:​

and

<Keyin-received>​

and

RECEIVED FROM: <terminal-id>​

Description

  • The program received a console keyin from an unauthorized source.
  • The <keyin-received> field contains the unauthorized keyin.
  • The <terminal-id> field contains the keyin's terminal identification.

JORS RCD READ LOCK FAILURE​

Description

  • The SMAJOR is unable to establish a lock on the JORS record in the TIP file.
  • A problem with the TIP file definition is the most likely cause.

*SMAJOR IS STOPPING*​

Description

  • SMAJOR is in the process of terminating.
  • SMAJOR sends this message as the reply to a STOP keyin.

VERBOSE MESSAGES OPTION SELECTED;​

and

TO TURN OFF, USE: <keyin-word> MSG0​

Description

  • SMAJOR was started with the M option, so verbose messages are turned on.
  • To turn verbose messages off, enter the <keyin-word> keyin with MSG0.

CURRENT MSG LVL IS <n>​

Description

  • The reply to the <keyin-word> MSG? keyin. The <n> field contains the current message level.
  • When the E option is also on, the message ends with WITH E OPTION.

**SMAJOR IS TERMINATING*​

Description

SMAJOR is terminating.